Outdoor living today 12ft X 16ft Breeze Manuel D'assemblage page 6

Pre-marked for Stub
Joist placement
E
Notches facing down
8.
On level ground, position 1 Joist (D) and
10 Stub Joists (E).
Joists are pre-marked for Stub Joist and Blocking
position.
Toll Free 1-888-658-1658
7.
Lift, position and Lag
screw the opposite
C-Girder to Posts.
D
www.outdoorlivingtoday.com
6.
Carefully slide C-Girder up into notch of
B-Girders. Be careful not to twist the Girder
when pushing up into place. Lag Screw
with Washers (2) the C-Girder to Post when
both pieces are flush with each other.
9.
With Stub Joists positioned correctly on Joist,
attach with 2 - 2 1/2" screws. Stub Joists should
be flush with top and bottom of Joist with all
notches facing down.
Page 6
Lag Screw with
Washers to Post.
You can find the
Square Drive Bit for
the screws in with
the Hardware Kit
Bag.
sales@outdoorlivingtoday.com