Taurus Studio 2000 Ionic Mode D'emploi page 12

English
Hair dryer
Studio 2000 Ionic
Dear customer,
Many thanks for choosing to purchase
a TAURUS brand product.
Thanks to its technology, design and
operation and the fact that it exceeds
the strictest quality standards, a fully
satisfactory use and long product life
can be assured.
Description
A Air concentrator
B Filter
C Speed and temperature selector
D Cool air button
E Foldable handle
F Diffuser
G Hanging loop
Safety advice and warnings
- Read these instructions carefully
before switching on the appliance
and keep them for future referen-
ce. Failure to follow and observe
these instructions could lead to an
accident.
Working environment:
- Do not use hair sprays or other
spray product whilst the machine is
switched on.
- CAUTION: In order to prevent over-
heating do not cover the appliance.
- Ensure that neither the air access
nor exit become either totally or
Manual Studio 2000.indb 12
partially covered by drapery, clothing,
etc., as this increases the risk of fire.
Electrical safety:
- Do not use the appliance if the
cable or plug is damaged.
- Ensure that the voltage indicated
on the rating label matches the
mains voltage before plugging in the
appliance.
- Connect the appliance to a base
with an earth socket withstanding a
minimum of 16 amperes.
- The appliance's plug must fit
into the mains socket properly. Do
not alter the plug. Do not use plug
adaptors.
- If any of the appliance casings
breaks, immediately disconnect the
appliance from the mains to prevent
the possibility of an electric shock.
- Do not use the appliance if it has
fallen on the floor, if there are visible
signs of damage or if it has a leak.
- CAUTION: Maintain the appliance
dry.
- CAUTION: Do not use the appliance
near water.
- Do not use the appliance near
bathtubs, showers or swimming pools.
- Do not use the appliance with damp
hands or feet, or when barefooted.
- Do not force the power cord. Never
use the power cord to lift up, carry or
unplug the appliance.
- Do not wrap the power cord around
the appliance.
- Do not clip or crease the power
cord.
- Check the state of the power cord.
Damaged or tangled cables increase
the risk of electric shock.
21/12/11 12:22