The function of lever
The bottle is not vacuum status
when the lever is raised.
Key functions
- Click the button to switch between temperature (°C or °F) or preserved time (days)
display.
- In temperature display mode, press 2 seconds until LCD flash to enter the Celsius or
Fahrenheit selection mold, and then click it to choose the mold you want.
- In time display mode, press 2 seconds until LCD flash to setup the store date from 1
day to 30. Additionally, you can manually change the beginning store time by clicking
the button when the LCD flashes. For example, when you press 3 times, that means
the bottle has been stored 3 days before you want to re-vacuum it.
- USB charging port inside this cover, please open it for charging.
- You can charge the device on
- You can check the charging process on
- You need about 2 or 3 hours to charge the battery completely.
- Clean the stopper using water for reuse and
put it into its box.
It means the bottle with perfect vacuum
status when the lever is down.
or
status.
mold.
19