Publicité
Les langues disponibles
Les langues disponibles
use. It needs to place the glass plate for at least 20
minutes, and then put it into the water to avoid cracking.
18. Group 2 Class B appliance
Group 2 ISM equipment: group 2 contains all ISM
equipment
intentionally generated and/or used in the form of
electromagnetic radiation for the treatment of material,
and EDM and arc welding equipment.
Class B equipment is equipment suitable for use in
domestic establishments and in establishments directly
connected to a low voltage power supply network which
supplies buildings used for domestic purposes.
19. This product internal light source LED light on＜60lm.
.INSTALLATION...
1. Take out all the packing. If there is a safe film over the oven,
tear it off before use. Check carefully for damage. If any,
immediately notify dealer or send to the manufacturer's
service center.
2. Microwave
non-corrosiveness environments, kept away from heat and
humidity, such as gas burner or water tank.
3. To ensure sufficient ventilation, the distance of the back of
microwave to the wall should be at least 10 cm, the side to the
wall should be at least 5 cm, the free distance above the top
surface at least 20 cm. the distance of the microwave to the
ground should be at least 85 cm.
in
which
............
ovens
must
radio-frequency
...... ........................... ........... ...
be
placed
27
energy
under
dry
is
and
Publicité
