Overload Indication - Refco RESCALE 4688292 Mode D'emploi

EN
The 100 % weight must be larger than the 0 % weight by at least
200g. If not, "Err" will show on the Alternate Numeric Display.
To clear the error, retrain as above using a 100 % weight that is at
least 200g larger than the 0 % weight. During training, the ZERO key may be
used to assist in setting the 0 % and 100 % values. This will have no e ect
on the training, as the Tank Capacity Mode relies on absolute, not relative,
weights.
To turn the function off, repeat steps 1 and 2, adjust with
screen displays Off instead of On
Battery Management
To increase the battery life, the REFSCALE has two functions:
Auto Shutoff:
After 30 minutes without pressing any buttons and the value not changing,
the device will turn off
Alternative Power Source:
Instead of using batteries, it's possible to power the REFSCALE via USB from,
for example, a power bank.

Overload Indication

If the weight applied to the weighing platform exceeds the maximum
capacity of the REFSCALE (110 kg / 243 lb), the display will show "OOR"
which means Out of Range. This is an absolute measurement.
To prevent damage to the REFSCALE, immediately remove the
weight from the platform.
14 | REFSCALE Instruction Manual
such that the