Abus IPCB72501 Manuel Utilisateur page 80

In the area to the upper left, the general status of the system is represented by a symbol.
System is running correctly
All parameters such as system temperature and processor usage are fine. All
functions in use are working correctly.
System is faulty
Errors have occurred in the system. But these are not critical to the basic
functionality of the camera. However, they could cause limitations or
malfunctions within certain functions. The system may need to be tested by the
installer.
System condition is critical
Certain parameters such as system temperature or processor usage are critical
for the system. The system must be tested by the installer immediately.
IP camera name:
Device number:
Model:
Firmware version:
Encoding version:
Number of Channels:
IP address:
Number of HDDs:
Number of Alarm Input:
Number of alarm outputs: number of switching outputs on the camera
Memory usage:
Data throughput:
display of the camera name. Can be modified using
Configuration/System
display of the max. resolution of the camera platform.
camera item number
display of the firmware version currently installed
version number of the video encoder
Typically, only 1 channel is shown for a camera. A number of camera
channels may be available for IP encoders.
display of the IP address currently set
display of the number of installed storage media (e.g. microSD card)
number of switching inputs on the camera
internal memory status
total video and audio bit rate over the network interface (outgoing)
80