EIBENSTOCK BST 50 V Notice Originale page 10

Technical Characteristics
Diamond Drill Rig BST 50 V
Fixture of the motor:
Max. drilling diameter
Attache:
Slewing range
Carriage brake:
Locking in top position:
Measures:
Length of the column:
Stroke:
Weight:
Order number:
Diamond drill rig with turnstile and operating instructions in a cardboard box.
Application for Indented Purpose
The diamond drill rig BST 50 V is made for diamond core drills with a collar
diameter from 53.
The max. drilling diameter must not exceed 68 mm.
In case of wrong handling or misuse, the producer does not assume any
liability.
After each readjustment always check that the screws are tightly
fixed so that safe operating of the drill rig is possible.
Mounting the turnstile
Mount the turnstile (1) on the
right or left side of the carriage
(2) depending on the work to be
performed.
Check whether the turnstile (1) is
fixed tightly.
Supply
Use
collar clamping Ø 53
68 mm
2 vacuum suction feets
360°
Yes
Yes
340 x 130 x 440 mm
290 mm
140 mm
6,8 kg
09645
1
2
10
Klick