Publicité
Les langues disponibles
Les langues disponibles
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by a special power supply
cable available at your dealer.
If defective, please dispose of the unusable device in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
DMX control channels:
DMX512 connection:
Smoke output:
Warm-up time:
Fluid consumption:
Output volume:
Tank capacity:
Dimensions (LxWxH):
Weight:
Fuse:
Accessory:
Safety bond AG-15 4x1000mm up to 15kg
Please note: Every information is subject to change without prior notice. 26.05.2010 ©
230 V AC, 50 Hz ~
1600 W
1
3-pin XLR
approx. 10 m
approx. 7 min.
approx. 100 ml/min.
approx. 566 m³/min.
2.5 l
368 x 305 x 220 mm
7.5 kg
F 8 A, 250 V
No. 58010364
20/36
00027443.DOC, Version 1.4
Publicité
