Publicité
Les langues disponibles
Les langues disponibles
Before you start
Here are a few things you should know before starting your dryer.
Sort and load
• Put one wash load in the dryer at a time.
• Do not mix heavy and lightweight items
together.
• To improve drying efficiency for one or
two items, add a dry towel to the load.
• For best results, untangle items before
inserting them into the dryer.
Functional prerequisite
Lint filter
Water Tank
A
DV6900B_LED_WEB_Heatpump_EN.indd 29
A
• Overloading reduces the tumbling
action, resulting in uneven drying and
wrinkling and longer drying time.
• Unless recommended on the care label,
do not dry woolens or fiberglass items.
• Avoid drying unwashed items.
• Do not dry items soiled with oil, alcohol,
gasoline, etc.
To prevent a risk of fire, make sure to clean
the lint filter before or after every load.
1.
Turn off the dryer.
2.
Open the door, and pull out the lint
filter (A) from inside the tumbler.
Remove the lint that has accumulated,
3.
and then clean the lint filter.
4.
Reinsert the lint filter, and then close
the door.
CAUTION
• Do not operate the dryer without the lint
filter in place.
• Do not use a damaged or broken lint
filter. This may reduce performance and/
or cause a fire.
If you have not installed the long drain
hose, empty the water tank before or after
every load to avoid leaks.
1.
Using both hands, pull the water tank
forward to remove.
Empty the water through the drain
2.
hole on top, and then place the water
tank back into place.
NOTE
• If you empty the water tank and then
press and hold Start/Pause (Hold to Start),
the corresponding indicator turns off.
English 29
2022/6/23 16:15:52
Publicité
