Publicité
Les langues disponibles
Les langues disponibles
3. Connect the USB flash drive, as shown below:
Note:
The USB (Output voltage: DC 5 V/0.5 A) ports can also be used to connect other USB devices, such as
EXP43, USB headset and so on. Yealink recommends that you connect Bluetooth USB dongle or Wi-Fi
USB dongle to the upper USB port, and connect EXP43 to the lower USB port.
4. Connect the network and power, as shown below:
You have two options for network and power connections. Your system administrator will advise you which one
to use.
Note:
The IP phone should be used with Yealink original power adapter (5V/1.2A) only. The use of the
third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone,
we recommend that you use the Ethernet cable provided by Yealink.
If inline power (PoE) is provided, you don't need to connect the power adapter. Make sure the hub/switch
is PoE-compliant.
Startup
Startup
After the IP phone is connected to network and supplied with
power, it automatically begins the initialization process. After
startup, the phone is ready for use. You can configure the
phone via web user interface or phone user interface
a. Upper USB Port
PC Connection
(Optional)
PC
PC
A
AC Power Option
PC
B
PoE ( Power over
Ethernet ) Option
PC
PC Connection
(Optional)
.
2
b. Lower USB Port
Power Adapter
(DC 5V)
Internet
Internet
IEEE 802.3af compliant
PoE Hub/Switch
Welcome
Initializing...please wait
Publicité
