Pioneer XDP-20 Mode D'emploi page 58

> Before Start > Part Names
Various settings
Advanced Setup
1
Library
Online
Line
Balanced
Out
> Initial Setup
2
Settings
Wi-Fi
Bluetooth
Brightness
Balanced Output Select
Line Out Mode
> Playback
Tap to make settings for Wi-Fi and BLUETOOTH, settings for audio output, pass code
settings, software updates, and a variety of other settings.
1. Tap " " in the home screen.
2. Tap the item you want to set.
∫ Wi-Fi
"On": Connection to a network via Wi-Fi is enabled. This also enables you to make various
settings related to Wi-Fi, such as selecting the SSID of the access point to be connected.
"Off (default value)": Connection by Wi-Fi is not enabled
∫ Bluetooth
Bluetooth
"On": Enables connection with a BLUETOOTH wireless technology enabled device. This
also enables you to make various settings related to BLUETOOTH, such as pairing.
"Off (default value)": When BLUETOOTH is not to be used
TM
Enable aptX HD: When this is On, you can get even better wireless sound from your
Bluetooth wireless technology enabled headphones or speakers that support aptX HD. If
sound interruptions occur while playing with aptX HD enabled, the problem may be
improved by disabling this feature.
"On (default value)": Enable aptX HD
"Off": Disable aptX HD. When disabled, play is with aptX or SBC, according to the codec
supported by the connected Bluetooth wireless technology enabled device.
∫ Brightness
You can adjust the brightness of the screen. The brightness can be set with the slide bar in
10 steps between " (1)" and "
the right (default value is "9").
∫ Balanced Output Select
Use when balanced headphones are to be connected.
"Balanced (default value)": Compared to the normal single-ended operation, you can get a
larger output and the high voltage is not grounded together with the small signal, so you can
anticipate a superior effect in the quality of the music. Because you get a larger output, you
can drive headphones with a higher impedance.
"ACG": The basic operating method is the same as Balanced (mode), but uses technology
to even more forcefully fix grounding standards, so you can enjoy a sound quality with
improved clarity and stability than Balanced (mode). Output volume is the same as the
Advanced Setup | Supplementary Information | Others
(10)". The screen becomes brighter when you slide it to
En 21