Citel DS440 Serie Notice D'installation

3-phase Type 2 Surge Protector
DS440 series
DS440-400
• Compact 3-phase Type 2
• In : 20 kA
• Imax : 40 kA
• Common/Differential mode
• Pluggable module
• Remote signaling contact (option)
• Complies with EN 61643-11, IEC 61643-11 and UL1449 ed.4
Characteristics
CITEL Model
Description
Network
Connection mode
AC system
Max. AC operating voltage
Temporary Over Voltage (TOV)
Charasteristics - 5 sec.
Temporary Over Voltage (TOV)
Charasteristics - 120 mn
Temporary Over Voltage N/PE (TOV HT)
Residual current
- Leakage current at Uc
Follow current
Nominal discharge current
- 15 x 8/20 µs impulses
Max. discharge current
-max. withstand @ 8/20 µs by pole
Protection level CM/DM*
@In (8/20µs) and @ 6kV (1.2/50µs)
Admissible short-circuit current
Associated disconnectors
Thermal disconnector
Fuses
Installation ground fault breaker
Mechnical characteristics
Dimensions
Connection to Network
Disconnection indicator
Remote signaling of disconnection
Spare unit
Mounting
Operating temperature
Protection rating
Housing material
Standards compliance
Certification
Part number
*Note: CM = Common mode (L/PE or N/PE)/ DM = Differential mode (L/N)
**Note: Rating in compliance with NF C15-100 art. 534.1.5.3. An order to increase service continuity, higher rating can be used. For further information, please consult product instructions.
67
44
60.8
DS440-400 DS440-230
Compact 3-phase+N Type 2 surge protector - 230/400 V - Pluggable
230/400 V 3-phase 230/400 V 3-phase
L/PE and N/PE L/PE and N/PE
IT TN
Uc 440 Vac 255 Vac
UT 580 Vac withstand 335 Vac withstand
UT 770 Vac disconnection 440 Vac disconnection
UT - -
Ipe < 1 mA < 1 mA
If None None
In 20 kA 20 kA
Imax 40 kA 40 kA
Up 1.8 kV 1.25 kV
Isccr 10000 A 10000 A
internal
Fuses Type gG - 50 A**
Type "S" or delayed
see diagram
by screw terminals: 1.5-10mm² (L/N) or 2.5-25mm² (PE)
4 mechanical indicators 4 mechanical indicators
Option DS440S-400 : Option DS440S-230 :
output on changeover output on changeover
contact contact
DSM440-400 DSM440-230
Symmetrical rail 35 mm (EN60715)
-40/+85°C
IP20
Thermoplastic UL94-V0
IEC 61643-11 / EN 61643-11 / UL1449 ed.4
EAC
311402 311702
DS440S-xxx
L1 L2
L1 L2 L3 N
Ft Ft
90 MI t° t°
9
36
DS440 S-xxx/G
DS440-230/G
230/400 V 3-phase
L/N and N/PE
TT-TN
255 Vac
335 Vac withstand
440 Vac disconnection
1200 V/300A/200 ms
withstand
None
None
20 kA
40 kA
1.5/1.25 kV
10000 A
3 mechanical indicators
Option DS440S-230/G :
output on changeover
contact
DSM440-230/G and
DSM440-230/GPE
311722
Imax Imax
40 kA 40 kA
DS440S-xxx/G
L3 L1 L2 L3
N
Ft Ft Ft
Ft Ft
t° t° MI t°
MI
MI t° t°
C
V : High energy varistor
GSG : Specific GDT
Ft : Thermal fuse
C : Remote signaling contact
t° : Thermal disconnection system
MI : Disconnection indicator
« » = CT1 configuration (common mode)
«G» = CT2 (common and differential mode)
Operating voltage
«S» = Remote signal option
Imax 40 kA
4 protected poles
DS440-120 DS440-120/G
Compact 3-phase+N Type 2 surge protector -
120/208 V - Pluggable
120/208 V 3-phase 120/208 V 3-phase
L/PE and N/PE L/N and N/PE
TN TT-TN
150 Vac 150 Vac
180 Vac withstand 180 Vac withstand
230 Vac disconnection 230 Vac disconnection
1200 V/300A/200 ms
-
withstand
< 1 mA None
None None
20 kA 20 kA
40 kA 40 kA
0.9 kV 1.5/0.9 kV
10000 A 10000 A
4 mechanical indicators 3 mechanical indicators
Option DS440S-120 : Option DS440S-120/G :
output on changeover output on changeover
contact contact
DSM440-120/G and
DSM440-120
DSM440-120/GPE
311602 311622
N
GSG
C
52