Monster ABRA A7 V12.5 Mode D'emploi page 3

Les langues disponibles

About this Concise User Guide

This quick guide is a brief introduction to getting your system started. This is a supplement,

and not a substitute for the expanded English language User's Manual in Adobe Acrobat

format on the Device Drivers & Utilities + User's Manual disc supplied with your computer.

This disc also contains the drivers and utilities necessary for the proper operation of the

computer (Note: The company reserves the right to revise this publication or to change its

contents without notice).Some or all of the computer's features may already have been

setup. If they aren't, or you are planning to re-configure(or re-install) portions of the system,

refer to the expanded User's Manual. The Device Drivers & Utilities + User's Manual disc does

not contain an operating system.

Regulatory and Safety Information

Please pay careful attention to the full regulatory notices and safety information contained

in the expanded User's Manual on the Device Drivers & Utilities + User's Manual disc.

Trademarks

Intel is a trademark/registered trademark of Intel Corporation.

Windows is a registered trademark of Microsoft Corporation.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference

that may cause undesired operation.

Instructions for Care and Operation

The computer is quite rugged, but it can be damaged. To prevent this, follow these

suggestions:

• Don't drop it, or expose it to shock. If the computer falls, the case and the components

could be damaged.

• Keep it dry, and don't overheat it. Keep the computer and power supply away from any

kind of heating element. This is an electrical appliance. If water or any other liquid gets into

it, the computer could be badly damaged.

• Avoid interference. Keep the computer away from high capacity transformers, electric

motors, and other strong magnetic fields. These can hinder proper performance and

damage your data.

• Follow the proper working procedures for the computer. Shut the computer down

properly and don't forget to save your work. Remember to periodically save your data as

data may be lost.