Harvia Xenio RGBW CX002RGBW Instructions D'installation Et D'utilisation page 19

Instructions for use for the user
5. Operation
5.1. Control panel
Fig. 3: Control panel
5.2. Switching on white light
Press the ON/OFF button for 3 sec. (long press)
► All light groups light up white (100% intensity)
► The brightness can be dimmed with - / + (7 levels)
5.3. Switching on the colour light:
Press the ON/OFF button BRIEFLY
► The last settings are activated, or the first time the unit is switched on,
all light groups light up yellow (100% intensity)
► Inside of the colour ring flashes red (=operation indicator)
5.4. Switching off the light
● Press the ON/OFF button BRIEFLY.
Touch colour ring
On the outside: Colour selection
On the inside: Display
Display of light group or white
1 - 4 light groups individually
W: all light groups white
Menu and navigation buttons
Decrease value
Change light group
Increase value
Control buttons
ON/OFF
Colour selection
Brightness
Colour changer
p. 4/7
EN