Event Protection Recording; Taking Photos - Medion LIFE P86009 Mode D'emploi

8.2.

Event protection recording

Your camera has an integrated G sensor. This sensor reg-
isters heavy braking and vibrations, and starts an event
protection recording fully automatically.
The sequences recorded this way are stored and are not
automatically overwritten. The sensitivity of this function
can be adjusted using the setup menu.
To manually start event protection recording during nor-
mal recording, press . If the screen saver is enabled,
you must first disable it by pressing any button.
Up to ten event protection recording videos can be stored
on the camera.

8.2.1. Taking photos

In order to take photos, please proceed as follows:
 During recording press the  button to create a pho-
to.
120 of 288