Publicité
Step 9
6
x30
TPK0015
With the assistance of a second person, carefully lay the unit face down. Attached Back Panel (E)
using nails (6) as shown and nailing straight into the raw edges. Ensure that the unit is square.
Distance from corner to corner must be equal as shown.
6
Flush edge of panel (E)
with top panel (A)
Pro Tip: Second person recommended for ease of assembly on this step.
ameriwoodhome.com
IBBBRTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
E
B
A
B7
AND MUST BE INSTALLED PROPERLY.
C
S
Flush edge of panel (E)
with board (B) and (C)
Publicité
