CONTINENTAL EDISON CELED55C19B2 Guide D'utilisation page 61

3.2 Auto Scan
- Press OK or RIGHT navigation button to enter it.
- Use navigation buttons to set the Country, Tuning
Mode and LCN.
Note: Users can see and set Scan Mode and
following items only when "Antenna" is DVB-C.
- When finished above settings, highlight "Auto Scan"
and press OK to start program tuning.
When "Antenna" is DVB-T:
3.3 DTV Manual Tuning
- Press OK or RIGHT navigation button to enter it.
- Use LEFT/RIGHT navigation button to select the
channel. Then press OK button to start searching.
When "Antenna" is DVB-C:
3.3 DTV Manual Tuning
- Press OK or RIGHT navigation button to enter it.
- Use navigation buttons to adjust the Frequency,
Symbol and QAM Type.
Notes:
- Press RED button repeatedly on remote control to
change QAM Type.
- Press GREEN button repeatedly on remote control to
change Symbol.
- Then highlight "Search" and press OK button to start searching.
EN-21