Publicité
Les langues disponibles
Les langues disponibles
Burst button
5
Spray button
6
Use of the device
CHOICE OF WATER
1.
This iron can be used with tap water or ideally distilled or demineralized water.
2. Do not use chemically descaled water or any other liquids for refilling.
HOW TO FILL IN WATER
4. Unplug the iron from the wall outlet, and wait for the iron to cool down.
5. Open the filling cover
6. Fill up to the maximum level "MAX" of the water tank.
Attention! Never fill in the tank when the appliance is plugged.
TEMPERATURE CONTROL SETTING
1.
Always check garment label for ironing instructions before ironing garment.
2.
If the ironing instructions are missing, then the table below may help you.
3.
If the fabric consist of various kinds of fibers (e.g. cotton with polyester) you must always select the
ironing temperature for the material with the lowest advised temperature.
SETTING THE TEMPERATURE
1.
Insert the plug in the wall socket and stand the iron upright.
2.
Turn the thermostat button to the desired temperature setting.
3.
The desired temperature has been reached when the pilot light has turned off. The pilot light will turn
on and off from time to time, indicating that the selected temperature is being maintained.
STEAM IRONING
Steam is regulated by steam knob move to the required position.
Warning: the iron gives off steam continuously only if you hold the iron horizontally. You can stop the
11
IRONING LABEL
Base
KIND OF TEXTILE
Synthetic
Silk - wool
Cotton - linen
Fabric not be ironed
8
THERMOSTAT SETTING
Low temperature
Medium temperature
High temperature
Publicité
