HP Pro Shredder 24CC Mode D'emploi page 15

Operating the Shredder
The shredder works using an automatic shredding mechanism. The shredder is operated using
the operating buttons on the top of the device.
The shredder is equipped with an additional status indicator at the front. This status indicator
indicates a fault has occurred which is specified by the buttons and status LEDs on the top of
the device.
Shredding Material Automatically
Observe the maximum permissible cutting capacity and other specifications defined in Section
Technical Data.
Warning!
This device is not intended to be used by children. Prevent hands, clothes and hair coming
into contact with the insertion slot.
Unplug the power plug if the device will not be used for a longer period. This device is
equipped with hazardous moving parts, so ensure you keep limbs well away from the
moving parts.
Important!
Risk of property damage through material jam! Observe the maximum cutting capacity of the
insertion slot.
1 Feed the material to be shredded in the centre of the insertion slot.
Î The insertion slot draws the material in automatically and stops when no more material is
fed in.
Shredding Material Manually
On rare occasions, it is possible that the sensors do not detect the material inserted.
1 Press and hold the FWD button.
Î The material is then drawn in and shredded.
2 Release the FWD button.
Switching the Shredder Off
Switch the shredder off when you no longer need to use it.
1 Switch the device off by pressing the On/Off button.
Î The shredder is switched off.
2 Disconnect the power plug from the power socket if the shredder will not be used for a longer
period of time.
- 15 -
EN