Jensen 1586LP Manuel D'utilisation page 10

ASSEMBLY INSTRUCTIONS
Connecting the LP Gas Tank
Check to make sure there is no debris in the head
of the LP gas tank or in the head of the regulator
valve. Make sure you check the burner and burner
ports as well.
Connect gas line to tank by turning knob clockwise.
Hand tighten only.
Disconnecting the LP Gas Tank
Make sure the valve on the LP gas tank is OFF.
Disconnect by turning the knob counter-clockwise
until it is detached from the valve.
5. Verify that the LP hose is being guided through the hose guide and not in contact with the burn
pan. Verify that the LP hose moves freely when opening and closing the door.
Hose Guide
10