Keep clear of obstruction all ventilation openings in the appliance enclosure or in the structure for
building-in.
Do not use mechanical devices or other means to accelerate the defrosting process, other than
those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartments of the appliance, unless
they are of the type recommended by the manufacturer.
In order to reduce flammability hazards the installation of this appliance must only be carried out
by a suitably qualified person.
For the product with non-conductive inner chamber(white), see the warning lable of product.
Put explosive/flammable material in sealed container before storing into laboratory refrigerator.
When restarting the refrigerator after a power failure or power-off, it is required to check the
setting of the refrigerator. Change of setting may spoil the articles stored.
Once the power of the refrigerator is cut off, wait for over 5 minutes before it is reconnected so
as not to damage the compressor or the system.
Put on your gloves at time of maintenance so as not to bump the sharp edges or corners,
resulting in personal injury.
Close the door of the refrigerator with your hand holding the handle so that your fingers will not
be pinched by the door.
The inclination angle shall be no greater than 45 ° when handling the refrigerator.
When handling the refrigerator, be careful not to trip over it, preventing damage to the refrigerator
or personal injury.
Do not pull or carry the equipment by the door handle, preventing damage to the refrigerator or
personal injury.
There shall be no obstacles around the refrigerator, and keep it well-ventilated and clear.
Do not spoil the refrigerating circuit.
Do not use any electric appliance in the store-room of the refrigerator except for the types that
the manufacturer recommended for use.
3