ASSEMBLY
1
Opening: as shown in the picture,hold on the handlebar together,then open it in
whole hog, when you hear "click" to pull the second lock,the frame will be opened.
2
Front wheel installation
(according to the design): as
picture A, insert the front wheel
fold joint into the front slot,if
you hear "click", the front wheel
is in right place. As picture B, If
you want to remove it, just hold
down the sheet iron and pull out
the wheel.
3
Rear wheel installation: as
shown in the picture, put the
rear wheel fold joint into the rear
slot. Hear "click" means the rear
wheel is installed to well. (If you
want remove it, just hold down
the sheet iron and pull out the
wheel).
4
Front armrest installation: as
shown in the picture A, insert it
into the groove of railing hole
(if you want to remove it just
press the button and pull out the
armrest).
A
A
19
EN
B