Airzone AZAI6WSPME2 Guide Rapide page 11

Operation of the device
FUNCTIONALITIES
Operation modes
The manufacturer's units can operate in both room temperature mode (TH) and in water
supply temperature mode (LWT).
The Aidoo device will be able to regulate the temperature in two circuits in water supply
mode, while it can only regulate one circuit in room temperature mode.
DHW control
The manufacturer's units allow you to manage domestic hot water (DHW) production status
control.
The "Powerful" function can be activated in DHW production status control, which forces the
DHW to reach a temperature that has been preset in the configuration of the unit. If DHW is
turned off, it will not be possible to activate this parameter.
Status modes
The circuits status can be controlled both in water supply mode and room temperature mode,
and in instantaneous domestic hot water production control mode ("Powerful" function).
The selectable status mode values are Cooling mode and Heating mode.
Set-point temperature
The unit temperature will depend on the operation mode:
•
In TH mode, the thermostat room temperature will be selected, and in LWT mode, the water
supply temperature at which the unit is to operate will be selected.
•
The DHW temperature can be selected within the ranges set by the unit's own main
thermostat.
The temperature limits can be obtained via protocol both for TH mode, LWT mode, and for
DHW production status control. The maximum DHW temperature range value can be selected,
but the minimum value cannot be configured.
EN
11