Publicité
Les langues disponibles
Les langues disponibles
2. INSTALLATION
2.7 FITTING THE AIR CONDITIONER
ON BRACKET (P11, P12)
After checking again that the fastening bracket
is securely fastened to the wall, and that any
necessary preparations for electric connection
and condensate drainage (if it needs) have been
made, fasten the air conditioner to its supporting
bracket.
Lift it up by holding the sides at the bottom.
Tilt the air conditioner slightly toward you to
facilitate the operation of fastening it to the
bracket. The air conditioner can now be pushed
firmly against the wall. Inspect carefully the
installation to make sure that the insulating back
panel must fit firmly against the wall and there
are no fissures at the back of the air conditioner
and that the two plastic semicircle on the back
side of the air conditioner are placed inside of
the two plastic hoses fixed inside the wall.
LIFT IT UP
HERE
The appliance shall not be installed the laundry.
The appliance must be positioned so that the
plug is accessible.
The appliance shall be installed in accordance
with national wiring regulations.
P14
P11
LIFT IT UP
HERE
P12
13
Water cap
Water
ENGLISH
Publicité
