Publicité
Les langues disponibles
Les langues disponibles
Mode
Selection
Thermostat
Control
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON
L4M 0G8 Canada • 1(866)820-8686 • www.napoleon.com
Switches between running modes.
Default setting: H-0
Settings:
H-0: Heater and blower off
FAN: Heater is off and blower is on
H-1: Heater and blower on
ECO: Heater running in economic mode
BST: Heater in enhance mode, blower
running at high speed
Note: Heater control function can be
enabled/disabled by holding the button
for 3s. When the heater function is
disabled, "LOC" will be displayed.
Press this button to activate the
thermostat. Continue pressing the same
button to increase the temperature
setting. Each press will increment the
temperature by 1°C (2°F), starting from
the default setting of 18°C (64°F).
To turn off temperature mode:
Repeatedly press the button until no
temperature value is displayed, indicating
"OFF." The temperature setting will reset
to the default value of 18°C (64°F).
Settings:
18ºC [64ºF], 19ºC [66°F], 20°C [68ºF],
21ºC [70ºF], 22ºC [72ºF], 23ºC [74ºF],
24ºC [76ºF], 25ºC [78ºF], 26ºC [80ºF],
27ºC [82ºF] and OFF.
Note: Press and hold the button for 5s to
switch between ºC and ºF.
W415-4185 | B-0 | 02.02.24 |
9
Publicité
