Napoleon W370-03 Instructions D'installation page 4

4. Remove the glass cover.
Note: If the glass is already
installed, it is held in place by
magnets. Otherwise, if not yet
installed, the glass is packaged
separately in the box.
5. Route the communication cable from the fireplace, through
the mounting hole and connect it to the back of the controller.
(Refer to "Fireplace Owner/ installation Manual" for "Wall mount
Controller connection location").
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON
L4M 0G8 Canada • 1(866)820-8686 • www.napoleon.com
W415-4185 | B-0 | 02.02.24 |
4