Above & Beyond GLOBE Mode D'emploi page 11

Setting up the tent
1. Open the frame in a sufficiently large area with the zips uppermost.
2. Attach the pressure gauge to the valve provided on one of the legs.
3. Check that all the other valves and the transverse zips on the legs are closed.
4. Lay the roof fully open on the frame and zip it in place. To do so, use the most central zip on the roof canvas. The two outermost
zips on the roof are used to attach the side walls later. Close the zips fully to the end.
1.
3.
2.
4.
EN