Publicité
Les langues disponibles
Les langues disponibles
IRONING CHART
FABRIC
Acrylic
Acetate
Nylon & Polyester
Rayon
Viscose
Silk
Cotton blends
Water-repellent
breathable fabrics
(excluding PVC-coatings)
Wool & Wool blends
Cotton
Corduroy
Linen
Denim
Please follow the instructions of your garment care label.
Varied ironing speed and fabric dampness might cause optimal setting to differ from the recommendations in the
table!
TROUBLESHOOTING
PROBLEM
Soleplate is not heating even
though iron is turned on.
Iron does not produce steam.
Steam jet and vertical steam
jet function does not work.
www.electrolux.com
TEMPERATURE SETTING
Outdoor
Outdoor
Outdoor
Outdoor
Outdoor
Outdoor
Outdoor
Outdoor
Wool
Cotton
Cotton
Cotton or
Linen
Cotton or
Linen
POSSIBLE CAUSE
Connection problem
Temperature control is in "Outdoor"
position.
Not enough water in tank.
Selected temperature is lower than
that specified to use with steam.
Steam jet function was used very
frequently within a short period.
Iron is not hot enough.
IRONING RECOMMENDATION
Dry iron inside out.
Dry iron inside out while still damp or use spray to
dampen.
Iron inside out while still damp or use spray to dampen.
Iron inside out.
Iron inside out.
Iron inside out. Use an ironing cloth to prevent shiny
iron marks.
Check the label and follow the manufacturer's
instructions. Outdoor setting is recommended for this
kind of fiber.
Gently wash and air-dry your outdoor garments
according to their care label instructions. Carefully and
slowly dry iron the outside to reach all parts of your
garment in order to reactivate the DWR (Durable Water
Repellency) treatment and restore the water repellency
of your garment*. You can use this setting after washing
and air-drying your outdoor garment or anytime you
want to restore the water repellency of certain areas of
your garment.
* Better than air drying only for water - repellent
outdoor garments
Steam iron inside out or use ironing cloth.
Dry iron while still damp or use spray to dampen. Use
maximum steam.
Steam iron inside out or use ironing cloth.
Iron inside out or use ironing cloth to prevent shiny iron
marks, especially with dark-colored fabrics. Dry iron
while still damp or use spray to dampen. Use maximum
steam.
Use maximum steam. Apply maximum steam by
pressing and holding the steam on/off button.
SOLUTION
Check main power supply cable, plug and
outlet.
Select higher programme like "
Fill water tank (see "Getting started", no 2).
Increase temperature to at least "
Cotton".
Put iron on horizontal position and wait
before using steam jet function.
Adjust the proper temperature to steam
ironing (up to "
vertical position and wait until temperature
indicator light turns off.
Cotton".
Cotton"). Put iron in
9
GB
FR
AR
Publicité
