Télécharger Imprimer la page

Electrolux E8SI1-82BM Mode D'emploi page 8

Publicité

Les langues disponibles

Les langues disponibles

Electrolux AquaSense filtered water, taking out impurities like limescale. If the
tap water is particularly hard, use a mix of 50% distilled water and 50% tap
water.
• The appliance may only be connected to a power supply whose voltage and
frequency comply with the specifications on the rating plate!
• The iron is not to be used if it has been dropped, if there are visible signs of
damage on the iron or its cord or if it is leaking.
• The appliance must only be connected to an earthed socket. If necessary an
extension cable suitable for 16 A can be used.
• If the appliance or the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person, in order to avoid
hazard.
• The iron must be used and rested on a stable surface. When placing the iron on
its stand, ensure that the surface on which the stand is placed is stable.
• Never leave the appliance unattended while connected to the supply mains.
• The appliance must be switched off and the mains plug withdrawn each time
after use, before cleaning and maintenance.
• The plug must be removed from the socket outlet before the water reservoir is
filled with water.
• The mains cable must not come into contact with any hot parts of the appliance.
• Do not immerse the appliance in water or any other liquid.
• Do not exceed the maximum filling volume as indicated on the appliances.
• The filling aperture must not be opened during use.
• Before refilling of the water reservoir, please remove plug from socket.
• Do not pour vinegar, descalers or other scented substances into the tank.
Otherwise the warranty may be revoked.
• This appliance is intended for domestic use only. The manufacturer cannot accept
any liability for possible damage caused by improper or incorrect use.
8
www.electrolux.com

Publicité

loading

Ce manuel est également adapté pour:

Renew 800E8si1-80bm