Publicité
Les langues disponibles
Les langues disponibles
CHILD LOCK
The safety lock prevents unsupervised operation by children.
To set, press and hold CANCEL for 3 seconds. LOCK is indicated on the display.
To cancel, press and hold CANCEL for 3 seconds. LOCK indication disappears.
SETTING
THE CLOCK
1) Touch CLOCK pad.
2) Use the number pads to enter the correct time. You
must touch at least three numbers to set the clock
(one for hour and two for minutes).
3) Touch CLOCK pad again.
SETTING THE TIMER
1) Touch TIMER.
2) Enter the amount of time by touching the number
pads. Digit time is in minutes and seconds and set left
to right. Set one digit (a 5 for 5 seconds) or up to four
digits (2405 for 24 minutes, 5 seconds).
3) Touch START/STOP.
COOKING PROGRAMS
A) ONE-STAGE COOKING
1) Use the number pads to set a cooking time. You
can set a cooking time from one second to 99
minutes and 99 seconds.
2) If you want to set a power level other than 100%
power, touch POWER, then...
3) Use the number pads to enter the power level. You
can set the power level from 1 to 9.
4) Touch START/STOP to start cooking.
Use single digits to set a cooking power level:
# Pad
% of Power
10%
1
2
20%
3
30%
4
40%
5
50%
60%
6
70%
7
8
80%
9
90%
10
100%
OPERATING INSTRUCTIONS
NOTES:
• This is a 12 hour clock. When the oven is first
plugged in or when power resumes after a power
interruption, the display will show ENTER CLOCK
TIME. If you prefer to not have the clock displayed,
touch CANCEL.
• You can check the clock time while cooking is in
progress by touching the CLOCK pad.
NOTES:
• Time countdown can be seen in display for 3
seconds before clock or cooking time is returned to
display.
• Touch TIMER and then touch CANCEL to cancel
TIMER during timing process.
B) TWO-STAGE COOKING
Some recipes require different stages of cooking at
different temperatures.
1) SET STAGE 1:
Follow steps 1 and 2 in "One-stage Cooking". DO
NOT TOUCH START
2) SET STAGE 2:
Touch COOK then enter proper cooking time and
(lower) power level. (Most 2-stage recipes use lower
power for second stage.)
3) Touch START/STOP.
NOTES:
• After stage 1 time has elapsed, one signal sounds,
signaling the beginning of stage 2.
• After total time has elapsed, 4 signals sound and
END appears in display. Touch CANCEL or open
oven door to clear END before starting another cook-
ing function.
6
Publicité
