Sony Marine Pack Handycam MPR-TRV2 Mode D'emploi page 12

Attaching the video camera recorder to the marine pack
10
Attach the front shell to the rear shell.
1
Put the front shell on the rear
shell.
Now you are ready for underwater recording.
Set the STANDBY/LOCK switch of the marine pack to LOCK.
If you set it to STANDBY, the battery may be used up before recording.
Note
When the viewfinder adaptor is attached to the viewfinder of your camcorder,
you get a wide view of what appears in the viewfinder screen.
However, when viewed from an angle, the screen may appear distorted.
12
2 Press the top of both grips
firmly.
Align here as
shown in the
illustration.
3 Lower both buckles at the
same time until they are
locked. You will hear a click.
Sony MPK-TRV2 (EN,F) 3-859-264-1X