EINHELL AQUINNA 36/38 F LED Instructions D'origine page 19

2. Layout and items supplied
2.1 Layout
1. Water drain screw
2. Intake connection
3. Coarse fi lter cap
4. Discharge connection
5. On/Off /Pump setting switch
6. Carry-handle
7. Battery cover
8. Buckle, prong-end
9. Key for coarse fi lter cap
10. Coarse fi lter
11. Ventilation screw
12. Battery charge level indicator
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Cordless garden pump
•
Key for coarse filter cap
•
Original operating instructions
•
Safety instructions
Anl_Aquinna_36_38_F_LED_SPK13.indb 19 Anl_Aquinna_36_38_F_LED_SPK13.indb 19
GB
3. Proper use
Range of applications:
•
For irrigating and watering landscaped areas,
vegetable beds and gardens
•
For operating lawn sprinklers
•
With coarse filter for drawing water from
ponds, streams, rainwater butts, rainwater
cisterns and wells
•
For supplying service water
Transport media:
•
For the pumping of clear water (freshwater),
rainwater and mild suds/service water.
•
The maximum temperature of the fluid must
not exceed +35°C if the unit is operated
permanently.
•
Do not use the equipment to pump
inflammable, gassing or explosive fluids.
•
The pumping of aggressive liquids (acids,
alkalis, silo seepage etc.) as well as liquids
with abrasive substances (sand) must
likewise be avoided.
•
This equipment is not designed to convey
drinking water.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user / operator and not
the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Voltage ...................................................36 V d.c.
Pressure connector
.................. approx. 33.3 mm (G1 female thread)
Suction connection
....................... approx. 33.3 mm (R1 male thread)
Max. pumping rate ..................................3800 l/h
Max. delivery head ...................................... 37 m
Delivery pressure max. ...........0.37 MPa (3.7 bar)
Suction height max. ....................................... 6 m
Water temperature max. ............................. 35°C
Measured sound power level ............. 70.6 dB (A)
Uncertainty ............................................. 2.97 dB
- 19 -
13.10.2022 09:37:21 13.10.2022 09:37:21