BORETTI M-System MSK-950 Notice D'emploi page 72

If it is decreased continuously to none position, then, it is
the power off position (namely, the motor stops operation.)
5. Timer key " ":
1.The timer key is the timer setting key if the timer key doesn't
work at both the position and indicator.
Ä Long press timer key
key for the digit increase, and use
decrease. Namely: The variable is 01 each time it is
pressed; the hour segment is with the largest digit of 23.
If it exceeds 23,
00, then, the
Å Press the timer key for the 2
, and the last two minute bit segment flash, use
for the digit increase, and use
decrease. Namely: The variable is 01 each time it is
pressed; the minute segment is with the largest digit of
59. If it exceeds 59,
to 00, then, the
ÆPress the timer key
setting exit and confirm key.
ÇLong press timer key
operation mode, and it is for the hour setting; Press it
for the 2
rd
3 time: For the time setting exit and confirm, and it
will be repeated again and again (if the 1
doesn't exceed 2 seconds, then it can't run this operating
procedure.)
2.The timer key is the timer if the timer key works at either the
position or the indicator.
Ä It is provided with three kinds of time segment, and they
are 5min/15min/30min/timer cancel in sequence, and
the 1
30min, the 4
and the 6
again and again.
Å Example: Let the setting time be 15min, the display is
00:15, 00:14, ...00:1, with 0:00 displays per minute,
and once "00: 00" appears, the motor position and the
, and the first two hour bit segment flash, use
key is null and void. If it is equal to
key is null and void.
key is null and void.
for the 3
nd time: Setting for the minute; Press it for the
st time is 5min, the 2
th
time is timer cancel, the 5
th
time is 15min ...., and it will be repeated
for 2-3 seconds, time segment
nd
time , time segment
key for the digit
key is null and void. If it is equal
rd
time, and it is the time
for 2-3 seconds under this
nd time is 15min, the 3
12
key for the digit
key
st
time pressing
rd time is
th
time is 5min,