BORETTI M-System MSK-950 Notice D'emploi page 64

If the model with Glass:
3.1 The cooker hood should be placed at a
distance of 65-75cm (26-30inch) from the
cooking surface for the best effect. See Pic 1.
3.2 Install the hook on a suitable place once the
installation height is fixed, and keep it in line.
The fixed position of the inside chimney
bracket is the place of chimney.
3.3 Fix the extensible pipe (dia.
150mm)according to the lead direction and
way, and then put the cooker hood on the hook.
See pic 3.
3. Put the glass according to the lead direction and way on the cooker
hood, and then use the screws to fix the glass, also lead the extensible
pipe outside of the room, meanwhile adjust the height of the inside
chimney to the position of the inside chimney bracket and fix on it by
screw , here should be sure the inside chimney can be flexed freely. See
Pic 4.
3.5 Put the two chimneys together onto the cooker hood body, meanwhile
adjust the height of the inside chimney into the suitable height, and fix
the inside chimney to the inside chimney bracket by screw. Finally, fix
the body with safety screw. See Pic 5.
4