Napier SPORTZ 84000 Manuel D'instructions page 3

Insert one end of the steel pole into the corner joint.
4
On the opposite end of the pole, insert the pin into the
grommet hole located in the corner of the tent.
Repeat for the other 3 steel poles.
A. Insert a blue screen room pole with the metal hook into the corner
7
joint located at the top corner of the screen room.
B. Insert the opposite pin end of the pole into the grommet hole
diagonally at the bottom corner of the tent.
Repeat on the other side
of the screen room.
7A
Attach the pole clips.
5
From inside the tent,
8
unzip the door and mesh
that faces the vehicle
cargo area. Roll up the
7B
mesh and door and secure
with T-straps.
Open the back hatch of
9
your vehicle.
Move the tent towards the
10
cargo area of your vehicle.
Slip the sleeve under the
bumper and over the
hatch and roof.
Slide the long fiberglass pole through the sleeve
6
located above the screen room door. Insert either end
of the pole into the starred end of the corner joint
located at the top corner
of the screen room.