Kenmore 461.99609 Guide Du Propriétaire page 11

Before You Call For Service
Problem
No Power.
Cabinet Temperature
too High.
Possible Cause What to do
A fuse in your home may
be blown or the circuit
breaker _ppad,
Replace fuse or reset circuit breaker,
Power surge+
Unplug the Wine Cooler,wait a
few seconds and then plug It back in,
Plugnot fullyInserted into Make sure the 3-prong plug is fully
wail outlet, inserted into outlet,
Temperature setting,
Vedfy the temperature control satttng
and adjust if neccessary,
Door not shut properly
or opened excessively,
Ensure that the door is fully closed
and that the gasket Is sealing against
the cabinets Open the doors only as
needed and for short pededs of time,
Recently added a large
quantity of warm beverages
to the cabinet,
Limit the quantity of warm beverages
being introduced to the cabinet at the
same time. Attempt to stagger the
load introductionIf possible.
Condensation on the
cabinet andtor doors.
High humtdltyconditions
in the home.
The condensationwlil subside once
humidity conditions return to normal,
Door not shut properly
or opened excessively,
Ensure that the door is fully closed
and that the gasket is sealing against
the cabinets, Open the door only as
needed and for short padodsof time.
If none of the above has rectified the situation please contact our customer care
department at 1-800- 4MY-HOME
10