Télécharger Imprimer la page

Setting Levels; Cleaning; Maintenance - VOSS sonic 360 Mode D'emploi

Masquer les pouces Voir aussi pour sonic 360:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
9

SETTING LEVELS

The VOSS.sonic 360 has four setting levels.
To switch between the levels, hold the magnet against the magnetic switch for about
one second after switching on the device. Each time the magnet is touched, it changes
to the next level.
After being triggered, the device transmits a frequency signal for 8 seconds.
ऀ Level 1: martens, raccoons, cats, dogs, rabbits, foxes
Indicator LED flashes once three times
ƒ
ऀ Level 2: dogs and cats
Indicator LED flashes twice three times
ƒ
ऀ Level 3: cats
Indicator LED flashes three times three times
ƒ
ऀ Level 4: Mixture of the three different frequency levels
Indicator LED flashes four times three times
ƒ
Info
The VOSS.sonic 360 has an internal memory. This saves the last selected setting
and remains in this setting even after the power is disconnected or the device is
switched off.
10

CLEANING

NOTICE
► Do not use aggressive solvents/detergents, brushes, sharp objects or similar
for cleaning as they may damage the surface.
► Do not immerse the device in water or other liquids. This may otherwise
cause a short circuit.
Before cleaning, switch off the device and disconnect the device from the power supply.
Use a damp cloth to clean the device if it becomes dirty.
11

MAINTENANCE

This is a low-maintenance device. Nevertheless, you must perform regular visual
inspections. Always check the device for damage before use. There are no parts inside
the unit that require maintenance.
NOTICE
Do not use the device if it is visibly damaged.
20
INSTRUCTION MANUAL VOSS.SONIC 360
45090 – 03.2021 – v04

Publicité

loading

Ce manuel est également adapté pour:

45090