Setting Up The Cover (With Milk Level Sensor) And Receiver; Cleaning And Maintenance - Jura Cool Control Wireless 0.6 L Mode D'emploi

Important information
Proper use
These accessories for the JURA Cool Control are
designed and built for domestic use. They are
used to wirelessly monitor the milk level in the
JURA Cool Control stainless steel container, which
is available separately. Use for any other purpose
will be deemed improper. JURA cannot accept any
responsibility for the consequences of improper
use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. No warranty
service will be offered for damage or defects
caused by non-compliance with the instructions
for use. Keep these instructions for use close to the
machine and pass them on to the next user.
For your safety
You must read and comply with the important
safety information in the JURA Cool Control
instructions for use.
1 Compatibility
E
The Cool Control Wireless is unfortunately
not compatible with all JURA coffee
machines. Ask your dealer or visit
www.jura.com.
2 Setting up the cover (with milk
level sensor) and receiver
E Clean the cover with the milk level sensor
8
thoroughly before first use using a damp
cloth and a mild liquid detergent.
T Switch on your coffee machine.
T Insert the receiver into the service socket of
the coffee machine.
E If you don't know where the service socket of
E If there is not enough milk in the stainless

3 Cleaning and maintenance

9
E Do not use harsh or abrasive cleaning agents
E
your coffee machine is, ask your dealer or
visit www.jura.com.
T Switch on the Cool Control.
T Remove the protective cover on the top of
the Cool Control.
T Fill the stainless steel container of the Cool
Control (at least a third) with milk.
T Use the cover to close the stainless steel con-
tainer. (You will find the correct procedure
for inserting the metal pipe and the adapter
in the JURA Cool Control instructions for
use.)
T Insert the stainless steel container into the
Cool Control. Ensure that the cover
connection is aligned correctly and engaged.
The LEDs in the cover and receiver flash. As
soon as both LEDs continuously light up
blue, the milk level sensor and the receiver
are ready for use.
steel container, this is indicated on the
display of your coffee machine during
preparation. The display text may vary
depending on the machine.
10
or hard objects to clean the machine. This
may damage the cover and milk level sensor.
The cover with the milk level sensor is not
dishwasher-safe.
de
Important information
en
fr
it
nl
es
pt
11
sv
ru
7