Publicité
Les langues disponibles
Les langues disponibles
Levelling the mini-bar
Once the mini-bar is in its final position, ensure that it is level. Adjustments can be made using the two le-
velling feet at the front of the mini-bar.
If the appliance is not level, the alignment of the doors and the magnetic contacts will be affected.
Cleaning before use
Wipe the interior of the mini-bar with a mild solution of bicarbonate of soda. Then rinse with hot water using
a sponge or a wrung cloth. Wipe the appliance in its entirety until there is no more water, then replace the
shelves and drawers. You can clean the exterior with a mild detergent.
Before connecting, you must:
Check that the plug is compatible with the power cable of the appliance. If this is not the case, contact a
specialist technician for assistance.
CAUTION: THIS APPLIANCE MUST BE GROUNDED.
Start-up
Before putting drinks in your mini-bar, leave it running for 24 hours to ensure that it is functioning properly,
and to allow it to reach the correct temperature.
Mini-bar start-up
All you have to do is connect the mini-bar.
NOTE: Do not store gas or combustible liquids in the mini-bar.
Page 6
Publicité
