TOOLCRAFT TC 20V Mode D'emploi Original page 25

• The tool can now be locked in place in different positions.
• Lock the tool holder again by closing the quick release (1) until it clicks into
place.
• Check that the tool is firmly seated. It must be securely locked in the tool
holder (3).
The quick release must be securely closed before starting work, otherwise there is a risk of injury from a
loose tool.
b) Inserting/removing the battery
• Slide the battery into the battery compartment on the back of the device until
it clicks into place, as shown in the image.
• To remove the battery, press the release button on the battery and pull it out
of the battery compartment.
25