Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
•
control panel cover.
• Using the multifunction remote control unit.
operate the unit in two (2) different modes:
•
• As a visual effect
FIGURE 3
1. Main Power Button:
position, either from the remote or on the touch pad for the functions to work.
2. Heater Control Button:
This button controls the heater ON/OFF and 11 temperature modes from 68°F (20°C) to 88°F (31°C). When the
Heater Control button is pressed, the temperature set point increases 2°F (1°C), allowing you to adjust the
heater will start at that setting, unless power to the unit has been interrupted.
3. Flame Control button:
4. Timer Button:
turned on, it will come on at the shortest time setting (30 minutes). Each time the Timer button is pressed, the
automatically turned off.
5. Fahrenheit/Celsius Display:
This button displays F (Fahrenheit) or C (Celsius) depending on how the temperature mode is set. When the
last temperature mode setting, and in later use, the display will start at that setting, unless power to the unit has
been interrupted.
6. Temperature/Timer Display
This LED display shows the set point for the temperature and timer functions. When either of these functions is
4
3
2
1
6
5
-
7
Publicité
