Publicité
Les langues disponibles
Les langues disponibles
Customizing the Length of Your Session
You can customize the length of your light therapy session in 5 minute
increments.
Pausing the Timer
Pause the timer by tapping the control once. The light will remain on and the
illuminated ring will fade in and out indicating the timer is on pause. Note: The
Stopping the Timer
Touch and hold the timer control until the illuminated ring turns off. If you would
also like to turn off the light, press the on/off button at the top of the lamp to
How to Use — continued
Step 1 - Touch and hold your finger on the center
control for 2 seconds. The illuminated ring will pulse
twice indicating that programming mode has begun.
Step 2 - Continue to hold your finger on the control
and select the length of your light therapy session.
Each bar of light represents five minutes.
Step 3 - Remove your finger when the desired time
has been illuminated. The illuminated ring will pulse
three times to recognize the chosen session time
and indicate that the programming mode has been
completed.
Note: If you touch the control again before the
completion of the three pulses, you will be able to
continue to modify the session time.
pause mode will automatically turn off the lamp after
one hour.
turn the power off completely.
7
Publicité
