Publicité
Les langues disponibles
Les langues disponibles
4. USE
Carefully review the safety information (Section 1) before you start using the appliance.
4.1. SETTING THE TEMPERATURE
1. Control panel
•
Controls
1. FRIDGE: Temperature control of the appliance
2. SUPER: Switch 'Super mode' on or off
3. ALARM/VACATION: Switch door open alarm on or off,
'Vacation-mode' on or off.
4. LOCK: Lock and unlock the control panel.
•
LED screen
5. Display set temperature
6. 'Supermodus' indicator
7. 'Vacation-mode' indicator
8. 'Lock' indicator
*The buttons only work when the appliance is unlocked. The buttons emit a beep when touched.
2. Temperature setting
The temperature of the refrigerator can be set by pressing the 'FRIDGE' button. After the last setting, the display
continues to flash for 5 seconds. After this, the desired temperature is set and this is shown on the display. (5). The
following settings are possible: 2 to 8 degrees and 'Super mode'. The recommended setting is 4.
3. Enable 'Supermode'
When the 'Supermode' function is enabled, the temperature in the box will be cooled
quickly, which helps prevent any loss of the food's nutritional value and preserve its freshness. Press the 'Super'
button (2) to select 'Supermode'. After the 'Supermode' indicator has blinked for five seconds, 'Supermode' is
enabled.
When 'Supermode' is selected, the 'Supermode' indicator will illuminate and display 2 °C. When 'Supermode' is
enabled, the temperature of the appliance cannot be changed. In this case, the 'Supermode' indicator flashes three
times. If the temperature needs to be changed, first switch off 'Supermode'. To switch off 'Supermode':
•
Press the 'Super' button to switch off 'Supermode'.
•
Once 'Supermode' is switched on, and the appliance is not reset, 'Supermode' will automatically switch off
after 3 hours. The appliance returns to the last set temperature setting.
*In 'Supermode' the appliance will consume more energy than normal. The most energy-efficient mode for this
appliance is 4 °C. In 'Supermode' the appliance may emit slightly more noise.
4. Vacation mode
This function can be used during long-term absence. When the vacation mode is switched on, the fridge cooling is
switched off completely. To activate the vacation mode, press the 'ALARM/VACATION' (3) button for three seconds.
The 'Vacation' symbol (7) on the display will light up. To deactivate holiday mode, press the 'ALARM/VACATION'
(3) button for three seconds. The 'Vacation' symbol (7) on the display will go out. The appliance will return to the
last set fridge.
35
Publicité
