HUANUO HNCM2 Manuel D'instructions page 8

Slightly Adjust the Height of Each Monitor
If the monitor is lower, remove the nut [I] and turn the bolt counter-clockwise to raise
the monitor. Then retighten the nut [I] after adjustment.
Step 6 Cable Management and Allen Keys Storage on the Wire Clip [06]
WARNING:
To avoid tipping, please be
careful not to extend the
arms too far forward or
backward. When you adjust
the angle of the arms, please
make sure two arms are
balanced to avoid instability
of the center of gravity of
the base.
I Loosen
Desk
08
C2
Tighten
Small Allen Key
Scan the QR code to watch
the meathod of adjusting the
laptop tray.