HUANUO HNCM2 Manuel D'instructions page 2

IMPORTANT SAFETY INSTRUCTIONS
• Please carefully read all instructions before attempting installation. If you do not
understand the instructions or have any questions or concerns, please contact our
technical support line at 1-800-556-0533 (US/CA) / 44-808-196-3874 (UK) or
customer service at support@huanuo.com.
CAUTION: Avoid potential personal injuries and property damage!
• Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We are not liable for damage or injury caused by
improper mounting, incorrect assembly or inappropriate use.
• The desk must be capable of supporting five times the weight of the laptop, monitor
and mount combined.
Weight Restrictions
MAX
22 lbs
(10 kg)
If your laptop and monitor
weighs more, this mount is
NOT compatible.
Check the VESA Pattern of Your Monitor before Installation
M A X :
If this desk mount is NOT compatible, please contact our customer service at
support@huanuo.com to find a compatible product.
Tools Needed (Not Included)
Phillips
Screwdriver
Supplied Parts and Hardware
WARNING: This product contains small parts that could pose a choking hazard.
Before starting assembly, verify all parts are included and undamaged. Do not use
damaged or defective parts. lf you require replacement parts, please contact our
customer service at support@huanuo.com.
• PLEASE NOTE: Not all hardware included in this package will be used.
DO NOT exceed the maximum weight indicated. This mounting
system is intended for use only within the maximum weights
indicated. Use with products heavier than the maximum
weights indicated may result in failure of the mount and its
accessories, causing possible damage and or injury.
"
m / 3 . 9
1 0 0 m
Electric Drill
(Optional)
WARNING
75mm ≈ 3"
100mm ≈ 3.9"
Minimum VESA Pattern:
75mm/3" (W) x 75mm/3" (H)
If your monitor VESA is greater than
100 x 100mm/3.9 x 3.9" or less than
75 x 75mm/3 x 3", this mount is NOT
compatible.
02
7/16-7/8" (11-22mm)
Drill Bit (Optional)