ISE SY-6910 Manuel D'utilisation page 22

Step 4 :
lnsert the Bolt (25) into Handle Bar (5), Cushion Frame (4), Washer (23) and screw wth
Nu(27).(Note: locking bolts requlired).
Step 5 :
Put Cushion frame (4)on Main Frame (1) and algn the holes. Then insert Bolt ([22) into
EN
Washer (24),Washer([23),Adjusting Tube ( and screw with Bolt (22).
2.Connect Hand pulse wire(80jand Hand Pul'se Wire(78j).(Note: Bolts to be locked)
8