ISE SY-6910 Manuel D'utilisation page 21

Step 2 :
Insert the Adjusting Tube(6) to Cushion Frame(4),then insert the Bolt(29) into Wash-
er(23)CushionFrame(4) and Backrest cushion(64).2.lnsert the Bolt (28) into Washer(23),
Cushion frame (4) and Seat cushion (63).
EN
Step 3 :
Insert the Brake handle (49) into the hole of Eccentric shaft (50), align the holes of
(49&50), thenscrew the Bolt (33).(Note: locking bolts required).
7