Hausmann 6135.468 Manuel De L'utilisateur page 25

OPERATION
JAW USE AND ADJUSTEMENT
Your HAUSSMANN Clamping Table is designed for maximum
versatility. The table top jaws adjust to clamp many work piece sizes or
shapes to simplify sawing, planing, sanding, drilling, routing, gluing and
painting jobs.
TO ADJUST TABLE TOP JAW
Turn the 2 front table top jaw adjustment handles counterclockwise to
move front jaw out; turn adjustment handles clockwise to move front jaw
in. See Figure 5. The table top jaw opens to clamp a maximum 4" (10 cm)
wide workpiece.
Do not attempt to use your Clamping Table unless the
jaws are securely locked in position.
AJUSTING JAW TO ANGLE
Front jaw adjusts to a maximum angle of 9 degrees for clamping irregular
shaped workpieces. To adjust jaw to angle, turn either the right or left
adjustment handle until desired angle is reached. See Figure 6.
Fig. 5
Fig. 6
25