TABLE OF CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23-28
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31
SAFETY INSTRUCTIONS
Safety items throughout this manual are labeled with
WARNING and CAUTION.
Means that failure to follow this safety statement may
result in extensive product damage, serious personal
injury, or death.
Means that failure to follow this safety statement may
result in minor or moderate personal injury, or property
or equipment damage.
READ ALL SAFETY INSTRUCTIONS BEFORE USING. Read the owner's
manual carefully. Learn its applications and limitations as well as the specific
potential hazards.
DO NOT USE THIS TOOL FOR SCAFFOLDING OR AS A LADDER. Make
sure to fully tighten handles when in use. Maximum capacity 330 lbs (150 kg).
DO NOT LOAD CLAMPING TABLE WITH MORE THAN 330 LBS (150 kg).
DO NOT APPLY AN UNBALANCED LOAD. An unbalanced load could result
in the table tipping over.
DO NOT ATTEMPT TO USE YOUR CLAPMING TABLE UNLESS THE
CLAMP IS SECURELY LOCKED IN POSITION.
DO NOT CLAMP OR MOUNT STATIONARY POWER TOOL DIRECTLY TO
TABLE TOP. This could cause serious bodily damage. When operating a
stationary power tool such as a Mitre Saw on your Clamping Table, be sure the
tool is securely bolted to a separate piece of plywood and the plywood is
securely clamped to the work table.
WHEN OPERATING A PORTABLE POWER TOOL SUCH AS A DRILL,
ROUTER, SANDER OR PLANER: always be sure that the work piece is
securely clamped to your Clamping Table. This will avoid kickback which could
cause serious bodily injury.
WHILE OPENING OR CLOSING YOUR TABLE, ALWAYS AVOID
POSITIONING HANDS OR FINGERS WHERE THEY COULD GET PINCHED.
DO NOT STAND OR CLIMB ON THE CLAMPING TABLE. It could fall or tip
over causing serious injury.
BE SURE THE TABLE LEG SET FRAME ASSEMBLY IS IN THE FULLY
OPENED POSITION BEFORE USING.
DRESS FOR SAFETY. Do not wear loose clothing, gloves, neckties or jewelry
(rings, watches): they can get caught and draw you into moving parts. Always
wear non-slip footwear; tie back hair.
18
. . . . . . . . . . . . . . . .19