SurfaceMaxx Foam Cannon Feuille D'instructions

Foam Cannon Notes:
With the sprayer removed from the bottle, fill bottle with warm water and soap made for foam cannons (not
included). Use recommended water to soap ratio on the soap label.
ASSEMBLY INSTRUCTIONS
1. Attach bottle to sprayer. Turn sprayer "clockwise"
until tight. Do not overtighten.
2. Connect foam cannon to quick connect fitting on
you spray gun or wand.
Note: Pressure washer should be off during
connection or trigger in locked position.
OPERATING INSTRUCTIONS
1. The air intake knob adjusts the amount of foam,
turn counterclockwise for more foam and turn
clockwise for less foam.
2. With the pressure washer on, pull the trigger on
pressure washer gun to spray foam.
Note: Do a test shot away from the object you are
spraying to ensure the foam cannon is attached
properly and you are getting the spray pattern you
want.
CAUTION:
Do not point foam cannon at people or animals as
it can cause injury.
INSTRUCTION SHEET
1
Pressure Washer
Foam Cannon
MODEL #SGY-PWA83A
1
2
1
www.surfacemaxx.com